No technical expertise required.
We need an individual to go to one of our retail clients to install a sensor (plug it into the wall) and take a few pictures. We are working with the retailer and the store manager or sales assistant will be expecting you.
This will take 1 hour at most. Ideally, this would be done on the following days of your choice, prior to 25 June.
We also require a manual count of shop traffice (2 hours) to be conducted following the device installation
You may have some flexibility around the time, but this will need to be agreed upon beforehand.
After being assigned the task, the process will be as follows:
1) Provide us with a postal address for sending the replacement device.
2) Receive device and organise with us a time to replace device.
3) Plug in device and receive confirmation from us that it is working correctly.
4) Perform manual count of foot traffic.
5) Post previous device back to us.
We will provide full support and be available on call to ensure the task is fulfilled smoothly.
This job vacancy was been posted over 40 days ago, but is still active and currently accepting new applications.
Login or Register to Apply Online
Not already a member? Register for free and create your online resume to apply. If you are already registered or have applied for a vacancy before, you can login below.
Member since: June 2017
#1 Store Performance Measurement & Management system used by leading specialty retailers to more consistently achieve sales targets
Information & Communication Technology